Gainsborough R050 Anleitung

120cm MC Solar Powered Tree
Item No: R050 /739380
Instructions for Use
Please read and retain these instructions for future reference
Power Details:
Battery 1 pc "AA" 1.2v 800Mah, Ni-MH, Rechargeable
ALWAYS POSITION THE SOLAR PANEL IN DIRECT SUNLIGHT
CHARGING AND OPERATION:
1.
Set switch (located on the back of solar case) to "ON" position. Charge the solar product by placing it under direct
sunlight for at least 8 hours.
2.
The light will work automatically. It will automatically charge under direct sunlight during the day and illuminate at
night.
3.
This solar lights has "Flashing" function as well. Turn switch to "ON" position and press "MODE" button you can
achieve the "FLASHING" function.
4.
Position the stake into soft ground at a depth of at least 15cm for stability.
5.
The branches are flexible, so you can bend them out to make the tree full and give it shape.
NOTE:
To verify that the switch is correctly in the "ON" position, cover the solar panel with your hand and the light should turn
on automatically.
WARNINGS AND SAFETY INSTRUCTIONS:
WHEN USING ANY APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED:
READ ALL INSTRUCTIONS BEFORE USE.
•
FOR DOMESTIC OUTDOOR USE ONLY.
•
• BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE FOUND. TAKE CARE
NOT TO DROP THE APPLIANCE AS HEAVY IMPACTS MAY CAUSE INTERNAL DAMAGE.
THE USE OF ANY ACCESSORY OR ATTACHMENTS NOT RECOMMENDED BY COOPERS OF STORTFORD MAY CAUSE
•
INJURIES AND INVALIDATE ANY WARRANTY YOU MAY HAVE.
•
REPLACE THE BATTERIES IF LEFT FOR LONG PERIODS OR NO LONGER CHARGING.
v001: 18/11/25
ENGLISH INSTRUCTIONS