Connection Examples; Monitor Connection Examples - Sony IPELA NSR-1000-Serie Installationsanleitung

Connection Examples

Monitor Connection Examples

This unit supports several combinations of monitor
connection. Refer to the following connection examples.
Note
You can select whether to output RCA audio or HDMI
audio in the Audio screen of the Setup Wizard or Setup
menu.
Caution
Be sure to connect the monitors and turn them on before
turning on the unit.
Example 1) When connecting two HDMI
monitors
POWER NETWORK 1 2 3 HDD 1 2 3 4 STATUS 1 2 3 4 ERROR
: Audio output locations.
Example 2) When connecting two analog RGB
monitors
POWER NETWORK 1 2 3 HDD 1 2 3 4 STATUS 1 2 3 4 ERROR
: Audio output locations.
REC
Audio amplifier
REC
Audio amplifier
Notes
• Do not connect the monitors to HDMI monitor
connectors 1 and 2.
• Do not connect a monitor to analog RGB monitor
connector 1 on the front of the unit while the unit is on.
Example 3) When connecting an HDMI monitor
and analog RGB monitor (HDMI monitor used
for operations)
POWER NETWORK 1 2 3 HDD 1 2 3 4 STATUS 1 2 3 4 ERROR
: Audio output locations.
Note
Use HDMI monitor connector 1 and analog RGB
monitor connector 2 for connections.
Example 4) When connecting an HDMI monitor
and analog RGB monitor (analog RGB monitor
used for operations)
POWER NETWORK 1 2 3 HDD 1 2 3 4 STATUS 1 2 3 4 ERROR
: Audio output locations.
Note
Use analog RGB monitor connector 1 and HDMI
monitor connector 2 for connections.
Audio amplifier
(connect to
REC
audio output
connectors
(L/R))
REC
Audio amplifier
35
Connection Examples