Installing Patch Files - Sony IPELA NSR-1000-Serie Installationsanleitung

Installing Patch Files

You can install patch files distributed by Sony onto the
NSR.
Patch files are distributed by Sony as more NSR-
compatible cameras and functions are added. We
recommend installing these patch files to operate the
NSR using the most up to date software.
For details on obtaining the patch files, contact your
Sony dealer.
1
Copy the patch file onto a USB flash memory
device or CD/DVD.
Caution
Do not change the file name or other aspects of the
patch file.
Note
Only the FAT32 format is supported for USB flash
memory devices.
2
Click [Patch Installation] in the Administration
Menu.
The Patch Installation screen appears.
3
Select the media on which the patch file is stored.
A list of patch file names appears.
4
Confirm a patch file name, and click [OK].
A confirmation message appears.
34
Installing Patch Files
5
Confirm the content of the message, and click
[Yes].
Caution
The NSR will automatically reboot after
installation of certain patch files. A confirmation
screen will appear if reboot is necessary. If you
cannot stop your current operations, select [No] to
cancel installation, and perform installation when
rebooting the NSR will not be a problem.
The following screen appears during installation of
the patch file.
When installation is complete, the patch is applied.
After restarting the unit, you can check the software
version under [Information] in the logon screen.
Make sure that the software has been updated to the
correct version.