Conrad N150 Bedienungsanleitung Seite 3

O P E R A T I N G I N S T R U C T I O N S
Conrad access point N150
Item no. 97 61 65
Intended Use
The product is intended to expand an existing network with a WLAN-access point. For this pur-
pose, a network cable is connected to an existing router. The device thus provides two WLAN
networks. One with WPA2 encryption and a second one, specifi cally for game consoles, with
WEP encryption. For security reasons, this second WLAN-net can be switched off with a slide
switch and is deactivated at delivery.
The power is supplied from the power adapter included in the delivery.
Always observe the safety instructions and all other information included in these operating
instructions.
This product complies with the applicable National and European requirements. All names of
companies and products are the trademarks of the respective owner. All rights reserved.
Package Contents
• Access point N150
• Wall plug transformer
• Network cable
• Operating Instructions
Features
• RJ45 network port 10/100MBit
• WLAN using 802.11b/g/n (max. 150Mbit), WLAN antenna integrated in the device
• The power is supplied via the enclosed power adapter
LEDs on the access point
Power Lights up when the device is supplied with power
WPS Blinks when WPS is active
Wireless Lights up when WLAN is activated; fl ashes during data transfer
Safety Instructions
Prior to starting up the product, read the operating instructions entirely; they
contain important information on the correct operation.
The warranty will be void in the event of damage caused by failure to observe
these safety instructions! We do not assume liability for any consequential
damage!
Nor do we assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions! The warranty
will be void in such cases.
• The unauthorised conversion and/or modifi cation of the product is not permitted be-
cause of safety and approval reasons (CE). It must not be opened or dismantled! It
does not contain any internal parts that must be adjusted or maintained by the user.
• The product is only intended for use in dry, indoor locations. No part of the product
should be allowed to become moist or wet; never take hold of it if your hands are
wet!
There is a risk of a life-threatening electric shock!
• The design of the wall plug transformer complies with protection class II. Only use a
proper outlet of the public supply system as a voltage source for the power supply.
• Only use the external power transformer supplied to power the unit.
• The product is not a toy. Keep devices that operate on the mains voltage out of the
reach of children. Therefore, be especially careful when children are around.
• Protect the product from direct solar radiation, strong heat (>35°C), cold (<0°C),
dust and dirt, splashes and dripping water, vibrations or mechanical loads.
• When the product is taken from a cold to a warm room (e.g., during transport),
condensation may be produced. This could damage the product. This might cause
a lethal electric shock!
Wait until the product has reached room temperature before using it. This may take
several hours.
www.conrad.com
Version 08/11
Connection and Getting Started
• First you connect the LAN socket of the access point (AP) using a 1:1 network connection
cable with the LAN socket of your router or network switch.
• Next, connect the wall plug transformer to the device and connect it to the wall socket.
• Wait until the access point has completed the self-test. This takes approx. 60 seconds.
• Switch on your PC and wait until the operating system has fi nished loading. In order to estab-
lish a connection with the access point, your PC naturally needs to have a WLAN interface.
Setting up a WLAN connection to the AP with WPS
• The simplest method of establishing a connection with the access point is by using the WPS
function. Your PC must support WPS for this.
• First press the WPS button at the back of the access point for approx. 2 seconds until the
WPS-LED starts fl ashing. The device is now in search mode.
• Next press the WPS button on your PC, also for about 2 to 4 seconds. Please refer to the
manual of your PC or that of your WLAN Card or your WLAN stick.
• The connection is now automatically established. Entering a password is not necessary, as
this is automatically transferred.
• The confi guration is thus complete.
Setting up a WLAN connection to the AP without WPS
• If your PC does not support WPS, you need to use the manual search of your operating
system.
• On delivery, the access point has an activated WLAN network. This is something like "ap-
pc-xxxxxx". This name is different for every access point and is printed on the bottom of the
device. Every "x" represents a number or letter.
• The accompanying password is also printed on the bottom of the access point and is also
different with every device.
• Now open the network search mode of your operating system.
• For Windows 7 Service Pack 1, click on the WLAN symbol in the taskbar and then select the
WLAN „ap-pc-xxxxxx".
In case the network is not shown yet, update the view by clicking on the symbol in the upper
right corner of the window.
Then click on "Connect".
When you are prompted, enter the security key which is printed on the bottom of the device.
Then click "OK" to confi rm.
• For Windows Vista Service Pack 2, right-click the network symbol in the taskbar and then
click "Connect to a network".
Select the WLAN "ap-pc-xxxxxx" and click "Connect".
In case the desired network is not shown, click on the symbol with two arrows in the top-right
to update the view.
If in the next screen you are prompted for a PIN, click the blue, underlined text beneath it.
Now the network key is required. Enter the key which is printed on the bottom of the device
in the specifi ed fi eld.
Click "Connect" to complete.
• For Windows XP Service Pack 3, right-click the WLAN symbol in the taskbar and then click
"View wireless networks".
Select the WLAN "ap-pc-xxxxxx" and click "Connect".
In case the desired network is not shown, click on "Update Network List".
Now the network key is required. Enter the key which is printed on the bottom of the device
in the specifi ed fi eld twice in the specifi ed fi elds.
Click "Connect" again to complete.
• Do not leave the packaging materials unattended. They may become dangerous
playthings for children.
• In commercial institutions, the accident prevention regulations of the Employer's
Liability Insurance Association for Electrical Systems and Operating Materials are
to be observed.
• In schools, educational centres, hobby and self-help workshops, the operation of
the product has to be supervised by trained employees.
• Handle the product with care. The product can be damaged if crushed, struck or
dropped, even from a low height.
• If you have any questions that are not answered in this instruction manual, please
contact our technical support centre or consult a professional.