Resetting The Microprocessor; Setup Menu; Clock Set - Pioneer DEH-S5000BT Bedienungsanleitung

Resetting the microprocessor

The microprocessor must be reset in the following situations:
– Before using this unit for the first time after installation
– If the unit fails to operate properly
– When strange or incorrect messages appear on the display
1
Remove the front panel (page 7).
2
Press the RESET button with a pointed instrument longer than 8 mm.

Setup menu

When you turn the ignition switch to ON after installation, the setup menu appears in
the display.
WARNING
Do not use the unit in standard mode when a speaker system for network mode is connected to the
unit. Do not use the unit in network mode when a speaker system for standard mode is connected to
the unit. This may cause damage to the speakers.
1
Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
Menu Item
LANGUAGE
[ENG](English),
[РУС](Russian),
[TUR](Turkish),
[FRA](French)

CLOCK SET

RESET button
Description
Select the language to display the text information from a
compressed audio file.
Set the clock.
1 Turn the M.C. dial to adjust the hour, then press to confirm.
The indicator moves to the minute setting automatically.
2 Turn the M.C. dial to adjust the minute, then press to confirm.
- 8 -