Eu Declaration Of Conformity; Waste Disposal - Extol Premium 8891800 Bersetzung Der Original Bedienungsanleitung

Read the user's manual before use.
Use certified eye and ear protection
with a sufficient level of protection.
Meets respective EU requirements.
Appliance with second class of pro-
tection. Double insulation.
The charger is intended only for in-
door use. It is necessary to protect the
charger against rain and moisture.
____ Direct current/voltage.
_ _ _
~
Alternating current/voltage.
Socket intended for charging a batte-
ry with direct current/voltage.
Safety protective transformer that is
safe in the event of a malfunction.
Collection of batteries, see below.
Li-ion
Electrical waste, see below.
EN
Do not subject the battery to direct
sunlight and temperatures greater
than 50 °C.
Do not throw the battery into water
and do not throw it out into the
environment.
Do not burn the battery.
The cordless power tool's rating label
includes a serial number indicating
SN
the year, month of manufacturer and
the series number of the product.
Table 4
XIV. Waste disposal
PACKAGING
y Throw packaging into the appropriate sorted waste
container.
CORDLESS POWER TOOLS
According to European Directive No. (EU)
2012/19, electrical and electronic equipment
must not be thrown out with household waste,
and must be handed over for ecological dispo-
sal at designated collection points for electrical
and electronic equipment. Prior to handing over the cordless
power tool, take out the battery, which must be handed over
separately for ecological disposal. You can find information
about collection points at your local town council office.
BATTERY
The battery contains contents that are dange-
rous to the environment, and for this reason
hand it over for ecological disposal/recycling
at a battery collection facility. According to
Li-ion
the European Directive No. 2006/66 EC on
Batteries, used batteries must not be thrown out with house-
hold waste or into the environment. You can find information
about collection points at your local town council office.
194
CONTACT DETAILS FOR NEW ZEALAND
Distributor: Madal Bal NZ, 57 Grey Street, Onehunga, Auckland, New Zealand 1061
E-mail: madalbal@madalbal.co.nz

EU Declaration of Conformity

Manufacturer Madal Bal a.s. • Bartošova 40/3, CZ-760 01 Zlín • Tax ID No.: CZ-49433717
hereby declares, that the devices designated below, based on their concept and design, as well as designs sold
on the market, comply with the requirements of the European Union listed below.
This declaration is issued under the exclusive responsibility of the manufacturer.
Subjects of declaration - product identification:
Cordless drills: Extol® Premium 8891800/8891801; 8891802; 8891804/8891805; Extol® Industrial 8791800/8791801
Cordless angle grinder Extol® Premium 8891840/8891841
Cordless reciprocating saw: Extol® Premium 8891820/8891821
Cordless hammer drill: Extol® Premium 8891818/8891819
Multifunctional oscillating tool: Extol® Premium 8891842/8891843
are in conformity with the following harmonised norms, including their attached amendments,
if they exist, on the basis of which conformity with the following harmonised regulations is declared:
2006/42 ES:
EN 60745-1: 2009, EN 60745-2-1:2010 until 19.1.2022; thereafter EN 62841-1:2015, EN 62841-2-1: 2018; EN 62841-1:2015,
EN 62841-2-2:2014 (cordless drills); EN 60745-1: 2009, EN 60745-2-6:2010 (hammer drill);
EN 60745-1: 2009, EN 60745-2-3:2011 (angle grinder); EN 62841-1:2015, EN 62841-2-4:2014 (multifunctional oscillating tool)
(EU) 2014/35: EN 60335-1:2012, EN 60335-2-29:2004; EN 62233:2008 (chargers)
(EU) 2014/30:
EN 55014-1:2006 until 28.4.2020/ thereafter EN 55014-1:2017; EN 55014-2:1997 to 25.3.2018/thereafter
pursuant to EN 55014-2:2015; for chargers furthermore: EN 61000-3-2:2014; EN 61000-3-3:2013;
(EU) 2011/65: EN 50581:2012
EN 62133:2013 until 14.3.2020/thereafter EN 62133:2017, UN 38.3 (battery)
2000/14 ES (cordless hammer drill):
Measured acoustic power level of the equipment representing the given model: 93±3 dB(A)
Guaranteed acoustic power level of the equipment: 96 dB(A)
The 2006/42 ES and 2000/14 ES Technical Documentation has been drawn up by Martin Šenkýř with headquarters at the addre-
ss of the manufacturer. The technical documentation (2006/42 ES: 2000/14 ES) is available at the address of the manufacturer:
Place and date of issue of EU Declaration of Conformity: Zlín, 30.11.2018
Person authorised to write up the EU Declaration of Conformity on behalf of the manufacturer (signature, name, function)
Martin Šenkýř
member of the board a.s.
195
EN