Maintenance And Cleaning - Imetec Bellissima Prodigy Gebrauchsanweisung

Air temperature selection button (3)
To select the required air temperature, press the air temperature selection button (3). The
red LEDs indicate the setting being used.
◦ = low temperature
◦◦ = medium temperature
EN
◦◦◦ = high temperature
Cold air setting:
Select air flow (4) only and set the required speed, making sure the temperature selection
button (3) is OFF (no LEDs lit up).
ACCESSORIES
Choose the accessory you need for the style you want to create, insert it in the connection
slot (1), and turn it slightly clockwise until you hear a "click". To release the accessory,
press the relative button (2) and turn the accessory anti-clockwise.
Plug in the air styler.
Pre-styling concentrator (9): use this accessory straight after washing your hair, to
remove any excess dampness.
Detangling brush (10)
• Use this accessory to untangle your hair before styling it.
Oval brush (11)
• Use this accessory to give your hair volume and shape.
38mm round brush (12)
Use this accessory to create soft styles and shape the ends.
Right or left coanda cone (13-14): Take a section of hair and position the cone near the
ends. Your hair will start to wrap around the cone. Bring the styler close to your head and
hold it in place for a few seconds, or until your hair is dry.
To fix the curls, set the cold air function for a few seconds. Switch off to release. To
change the direction of the air flow, replace the cone.
o n .

MAINTENANCE AND CLEANING

If necessary, clean the appliance and accessories with a damp cloth. Do not use solvents
or other aggressive or abrasive detergents as they may damage the surface. Check the
appliance intake filter regularly, removing accumulated dust and hair.
CLEANING THE INTAKE FILTER
Hold the appliance by the handle, turn the removable filter cover (7) anti-clockwise and
pull it towards the cable.
Use a dry cloth or brush to clean the intake filter (7a) inside the removable filter cover (7).
WARNING!
the appliance from the mains
before cleaning or performing
maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.
Always
14
disconnect