Cleaning And Maintenance - Sunshower DELUXE WHITE Anleitung

An overview of the operation panel can be found on page 9.
Ensure that you are approx. 17.7 inch (45 cm) away from the Sunshower.
•
Press the IR logo for an infrared session, or the UV logo for an ultraviolet session
•
and put on the UV glasses.
The UV session is programmed for 10 minutes, the IR session is programmed for
•
8 minutes.
The number of LEDs that light up on the display match the number of minutes left
•
of the session.
When you press the STOP button your session will end prematurely.
•
After each session the products will cool off for 4 minutes before it is ready for use
•
again. The cooling time will be displayed by a flashing light.

CLEANING AND MAINTENANCE

The outside of the Sunshower is the only part that can be cleaned by the user.
•
The Sunshower can only be cleaned by hand.
•
Never use a high-pressure spraying pistol to clean the Sunshower.
•
Do not clean the Sunshower when the unit is on.
Only use mild cleaning products for the Sunshower. Glass cleaner or "general
cleaner" can damage the glass and make it dull. A special cleaning set for the
Sunshower is available. The set contains a mild cleaner and a protector, which
protects the Sunshower from limescale formation. For additional information
email info@sunshower.nl.
Infrared logo (IR)
Ultraviolet (UV)
Coolsession rending
21