Atlas Copco LTD28 R-RR Produktanleitung Seite 4

Verfügbare Sprachen

Safety and operating instructions

Tobias Hahn, Managing Director

Signature of issuer

RoHS and WEEE

Information concerning Restriction of Hazardous Substances (RoHS):

This product and its information, meets the requirements of the RoHS Directive

(2011/65/EU).

Information concerning Waste of Electrical and Electronic Equipment

(WEEE):

This product and its information, meets the requirements of the WEEE Direc-

tive (2012/19/EU), and must be handled according to the directive.

The product and/or its battery are marked with a crossed trashcan, see figure be-

low.

The symbol indicates that parts within the product must be handled in accor-

dance with the WEEE Directive. These parts are indicated as "WEEE" in the

Spare part list, see under Remarks.

The entire product, or the WEEE parts, can be sent to your "Customer Centre"

for handling.

For more information, consult the website

http://www.atlascopco.com/.

Choose Products - Links and downloads, and click EU RoHS and WEEE

directives (ENGLISH only).

Installation

Installation of vibrating tools

It is recommended that a minimum length of 300 mm of flexible hose for com-

pressed air is inserted between a vibrating tool and the quick-action coupling.

Air quality

• For optimum performance and maximum machine life we recommend the

use of compressed air with a maximum dew point of +10°C. We also rec-

ommend the installation of an Atlas Copco refrigeration-type air dryer.

• Use a separate air filter of type Atlas Copco FIL. This filter removes solid

particles larger than 15 microns and also removes more than 90 % of liquid

water. The filter must be installed as close as possible to the machine/equip-

ment and prior to any other air preparation unit such as REG or DIM (please

see Air Line Accessories in our main catalogue). Blow out the hose before

connecting.

LTD28 R-RR