Battery Capacity - Hama Myvoice Advanced Bedienungsanleitung

5. Charging
Fully charge the headset once before using it for the first time .
1
Switch off the headset and connect it
2
Headset charging process
The LED (5) flashing every 2 seconds during the charging process . Once the charging process is
complete, the LED (5) lights up .
It can take up to 2 hours for the battery to be fully charged .
CHARGING
white
3

Battery capacity

When the headset battery capacity is low, the LED (5) flashes and the announcement "Battery
Low" is heard .
Note
If you have not used the product for a few months, it can take up to 15 - 30 minutes until the
status LED (5) lights up during the charging process .
USB-C
2
:00
CHARGED
h m
white
Ensure that the headset is switched off before
charging it .
Connect the USB charging cable included to the
charging socket (8) . Connect the free plug on the
USB-C charging cable to a suitable USB charger .
To do this, consult the operating instructions for
the USB charger you are using .
7