Battery Capacity - Hama MyVoice2100 Bedienungsanleitung

5. Charging
Fully charge the headset once before using it for the first time .
Switch off the headset and connect it
1
Ensure that the headset is switched off before charging it .
A
2
Headset charging process
The status LED (3) lights up solid red during the charging process .
Once the charging process is complete, the LED (3) lights up blue .
It can take up to 2 hours for the battery to be fully charged .
CHARGING
3

Battery capacity

When the headset's battery capacity is low, the LED (3) flashes red and the announcement
"Battery Low" is heard .
Note
If you have not used the product for a few months, it can take up to 15 - 30 minutes until the
status LED (3) lights up red during the charging process .
B
micro USB
2
:00
h m
red
A: Place the headset in the charging tray (8) .
Connect the USB charging cable included to the
charger tray charging socket (9) . Connect the
free plug on the micro-USB charging cable to
a suitable USB charger . To do this, consult the
operating instructions for the USB charger you
are using
B: Connect the USB charging cable included to
the charging socket of the headset (7) . Connect
the free plug on the micro-USB charging cable
to a suitable USB charger . To do this, consult the
operating instructions for the USB charger you
are using .
CHARGED
blue
6