• Before laminating
and to make sure that your machine is working correctly.
• When laminating
margin of 3mm (% inch) around the edge. If Laminating several objects leave a space
of 6 mm (1/4inch) between objects. If you need to cut a pouch do so after laminating
Cutted pouches can leak glue in to your machine. Pouches are also easier to cut ac-
curately when laminated.
Ready
Power
REV
0
a)
laminating
document
film
to laminate
NOTICE:
1. Temperature
adjustor
80 and
175 mic.
2. Please be sure to turn the selection
If laminating
80 mic film pouch at the option of 100— 125 mic, the film could be lami-
nated excessively.
film could not be melt completely.
3. For good laminating effect, please take out the film after laminating as soon as pos-
sible.
4. If changing to a thinner pouch type allow time for the machine to cool to the correct
temperature. If changing from hot to cold lamination make sure machine is completely
cooled
Prolamic
E2320
03.indd
3
A Practical
advice for laminating:
it is advisable
to carry out a test lamination
both hot and cold pouches we recommend
A Operating
• Switch the power on and the power indicator will turn on red light.
• Select the laminating
photo you want to laminate.
• Place the paper/photo
• Adjust the temperature adjustor to the right options, refer to b)
• Red light indicates that machine is heating up. Normally 3—5 min.
• Green Ready light indicates machine is ready and reached selected
temperature.
• Insert laminating pouch in the front of machine according to the width
indication, refer to c).
• The laminator will feed the laminating
the
back
of the
machine.
can switch cold laminating
switch to the right option according
If laminating
100— 125 mic film pouch at the option of 80 mic, the
that you leave minimum
instruction:
pouch format according to the size of paper/
into the laminating
pouch, refer to a)
pouch through heat rollers to
1
cold
80 mic
100-125
mic
3
4
175 mic
& hot laminating
to familiarize
yourself
c)
option between
to the film
17.10.2008