ProfiOffice Prolamic E2320 Bedienungsanleitung Seite 2

Dear customer,
thank you for choosing a Laminator from ProfiOffice Germany. We are sure that this
device will serve you well. Please spend some time for studying its manual in order
to make sure, that you will work with the "Prolamic" safely, easy and adequate.
Don't place
onto the machine.
When the machine is working, don't
touch the covers! Maybe you will get
hurt!
If the machine
there is a strange
paper jam, please
chine and plug it off immediately
Electric
occur!
Rear plate
Housing
Laminating insert
Prolamic E2320 03.indd 2
A Safety warning symbols
any other substances
It maybe hurt!
is over preheated, or
smell, or there is
stop using ma-
shock or fire disaster may
A Parts and
Work light
Temperature/film
thickness adjustment knob
Sincerely ProfiOffice Germany
and explanation:
Don't disassemble,
the machine on your own! This may
cause an electric
tal hurt!
If the machine is not used for a long
time, please plug off the machine
and insert the power cord
power cord slot! Electric
fire disaster may occur!
Please make sure that you use the
correct voltage
eral power cords!
fire disaster may occur!
Function:
rebuild or repair
shock or acciden-
into the
shock or
and don't use sev-
Electric shock or
Power light
REV button
Power switch
17.10.2008