Dough Hooks; Mixing Bowl; Use - Gourmet Maxx 02617 Gebrauchsanleitung

EN

Dough Hooks

The dough hooks are suitable for stirring and kneading bread doughs and heavy, fi rm
cake mixtures.

Mixing Bowl

The mixing bowl is used for receiving the food during the preparation of cake mixtures
and bread doughs, for example, and for mixing together eggs and whipped cream, for
example.

Use

CAUTION!
■ There may still be some production residues on the device. To avoid harmful effects
to your health, clean the device before you fi rst use it (see "Cleaning and Storage").
■ Make sure that the switch for adjusting the speed settings is in the 0 position before
the device is connected to the mains power.
■ Do not overfi ll the mixing bowl. This might result in the device overheating or damage
to the motor.
■ Never switch on the device if the tilting mixer head has not been fl ipped down!
■ Never fl ip up the tilting mixer head during use. The device must be switched off when
the tilting mixer head is being fl ipped up or down.
■ Never fi ll the device with hot food or liquids! The contents must not be hotter than
50°C. Allow hot food to cool down before processing it any further with the device.
■ Remove the mains plug from the plug socket before each exchange of the inserts.
■ Make sure that the inserts are not mixed up for use. Only either the dough hooks or
the stirrers may be used at any one time.
1. Place the device on a dry, even and fi rm surface with suffi cient clearance around it.
Make sure that the suction pads (10) stick fi rmly to the surface.
2. Place the ingredients in the mixing bowl (12) in accordance with the recipe.
3. Press the release button for the mixer head (7) and put up the mixer head (5).
4. Place the mixing bowl (12) onto the rotary disc (11). Make sure that it is seated
straight on the rotary disc (11).
5. Select the inserts you want (see "Accessories").
02617_DE-EN-FR-NL_A5_V1.indb 14 02617_DE-EN-FR-NL_A5_V1.indb 14
14
The hand blender (4) can be used both together
with the base unit (8) as a food processor and indi-
vidually as a conventional hand blender.
Attaching: Place the hand blender (4) on the mixer
head (5) from above and make sure it engages
(audibly). Make sure that it fi ts correctly.
Removing: Press the release button for the hand
blender (6) and simultaneously pull the hand
blender (4) upwards to remove it.
10.07.2017 10:10:21 10.07.2017 10:10:21