IVT CFM-355-RC Bedienungsanleitung Seite 10

Instruction manual
TOOL SPECIFICATIONS
EN
Voltage ~ Frequency [V ~ Hz]
Rated power [W]
No-load speed [RPM]
Cutting wheel diameter [mm]
Cutting wheel inner hole diameter [mm]
Cutting wheel thickness [mm]
Max. cutting depth [mm]
Weight [Kg]
Safety class
PART LIST
1. Handle
2. Upper guard
3. Side guard
4. Cutting wheel
5. Spindle lock
6. Lock-off button
7. On/off switch
8. Inner flange
9. Motor housing
10. Carbon brush holder cap
11. Spark chute
12. Quick-release lever
13. Vise handle
14. Vise plate
15. Vise stop
16. Vise adjusting bolt
17. Base
18. Hold-down chain
19. Hexagonal bolt
20. Flange washer
21. Outer flange
22. Spacer
CONTENT OF THE BOX
Instruction manual (1 pc), spanner (1 pc), carbon
brushes set (1 pc).
INTENDED USE
This model of cut-off machine is intended for cutting
various metallic materials such as metal billets, sections,
round bars, pipes etc. using the correct cutting wheel.
Model CFM-355-RC
230 ~ 50
2450
3900
25.4
15.5
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user manual and all other literature supplied
with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
you know how to stop to use it in case of emergency.
Following these simple instructions will also maintain
your tool in good working order.
The tool must be assembled correctly before use.
Only use the tool for its designed purposes.
On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
Never leave the tool unattended.
Never allow children to use the tool. Children should be
supervised to ensure that they do not play with the tool.
Keep children and pets away. All onlookers should be
kept at a safe distance away from the tool when it is
in use.
The user is responsible for third parties while working
with the tool.
People who aren't acquainted with the operating
instructions, children, juveniles who have not yet
reached the minimum age for using this tool and people
under the influence of alcohol, drugs or medication
are not allowed to use the tool. Local regulations may
restrict the age of the operator.
10
355
3.2
100
I