Working Modes; Connecting Sensors - Cycplus F1 Bedienungsanleitung

Working Modes

Speed Mode: Connect to speed sensors and cycling trainers to automatically adjust the wind
speed according to your cycling speed, simulating a realistic cycling experience.
Heart Rate Mode:
the wind speed based on your heart rate, enhancing your cooling experience.
Power Mode: Connect to power meters and cycling trainers to automatically adjust the wind
speed according to your exercise power, providing a more responsive airflow.
Manual Mode:
sensors, allowing for flexible adaptation to various exercise scenarios.
Smart Mode: Connect to multiple devices and sensors (speed, heart rate, power) to
automatically adjust the wind speed based on various data inputs for optimal automation.
Indicator Light Functions
Icon

Connecting Sensors

1. Ensure that the sensor to be connected is turned on and in pairing mode.
2. Press the Function Button
sensor for that mode will be connected.
3. During the first pairing, the fan will automatically connect to the sensor with the strongest signal.
Subsequently, it will automatically connect to the last used sensor.
4. You can also connect to a smartphone and match sensors for each mode in the CYCPLUS APP . See
[APP Usage Procedure for details.
5. To switch sensors, long press the
mode and re-search for pairing.
6.In Non-Manual Modes, if no sensor signal is detected, the fan will automatically turn off after 3
minutes.
English
Connect to heart rate monitors and sports watches to automatically adjust
Connect to a Remote Controller to manually adjust the wind speed without using
Light Effect
Green, Solid
Green, Blinking
Green, Breathing
Red, Solid
White, Solid
[ ]， to switch to different operating modes, and the corresponding
]
[ - ]
ANT+ device connected and working normally
ANT+ device searching and pairing
Paired signal lost, waiting for connection
No sensor connected in this mode
Showing speedlevel by bar lights, in Manual Mode
and [ + ] buttons to clear the paired sensors in the current
Status
06