Cycplus F1 Bedienungsanleitung Seite 14

Use a soft brush or towel to clean the dust from the mesh holes of the air cover, or rinse with
3
clean water. Be sure to dry thoroughly after rinsing.
4
Use a soft brush to clean the fan blades along the direction of the grille. Clean both sides and
the air outlet grille downwards. Do not use any liquid to clean the impeller or the inside of the fan.
b.Reassemble the Air Cover
5
The air covers do not need to be distinguished between left and right. After cleaning, reassem-
ble the air covers and rotate them in the direction indicated by the icons until the pointer rotates to
the icon [ ]. You will hear a "click" sound, indicating the air cover is locked.
6 Tighten the two M3 Screws at the bottom of the fan body to complete the cleaning and
maintenance work.
7
After cleaning, there may be some dust left inside the fan. Connect the power supply and adjust
to the maximum speed, run for a few minutes to blow out the dust, and then use. During this
process, do not direct the airflow towards people or animals to avoid dust entering the eyes.
5
11
4
5
3
6
6
English