Cycplus F1 Bedienungsanleitung Seite 12
Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
Heart Rate Mode Settings
Power Mode Settings
Smart Mode Settings
Smart Start Settings
09
1. Click the switch button at the top right
switch to
Heart Rate M
connection selection.
2 Select the target sensor and connect, or re-
.
select the sensor connection at the bottom right.
3 Input the heart rate range by clicking the icon
.
on the right
[ ]
. This range corresponds to the
minimum and maximum wind speeds, and the
wind speed will vary according to the actual
heart rate.
1. Click the switch button at the top right
switch to Power Mode and enter the sensor
connection selection.
2 Select the target sensor and connect, or re-
.
select the sensor connection at the bottom right.
3 Input the power range by clicking the icon on
.
the right
[ ]
. This range corresponds to the
minimum and maximum wind speeds, and the
wind speed will vary according to the actual
power.
1. Click the switch button at the top right
switch to Smart Mode. The wind speed will vary
intelligently based on multiple sensor data from
other modes without manual settings.
1.Click the switch button in the upper right corner
[
]. When enabled, the fan will automatically
turn on if power data is detected from the trainer.
[
ode and enter the sensor
[
[
English
]
to
]
to
]
to
Inhaltsverzeichnis
