Specifications & Warranty Disclaimer - Hifonics ZXi 1501 Bedienungsanleitung

MODELS
CHANNELS
CIRCUIT
OUTPUT POWER RMS 13,8 V
Watts on 4 Ohms
Watts on 2 Ohms
Watts on 1 Ohms
OUTPUT POWER MAX. 13,8 V
Watts on 4 Ohms
Watts on 2 Ohms
Watts on 1 Ohms
Damping Factor
Signal-to-Noise Ratio
THD&N
Input Sensitivity
Input Impedance
FILTER
X-Over Modes
Various Lowpassfilter
Sub Boost @ 20 - 80 Hz
Q-Control
Subsonicfilter
Phase shift
Master/Slave Mode
Bass Remote
Slave Output (RCA)
Fuse Ratings
Dimensions
Width & Height
Length (Length total)
Technical specifications are subject to change! Errors are reserved!
For damages on the vehicle and the device, caused by handling errors of the device, we can't assume liability.
All HiFonics Amplifiers are tagged with a individual serialnumber, which will be registerd for statistic and service conditional
purposes.
All HiFonics Amplifiers are tagged with a E-Certification Number and also a CE-Certification Mark. Thereby these devices are
ceritified for a use inside vehicles inside the European Union (EU).
WARRANTY DISCLAIMER
The limited warranty comply with legal regulations. Failures or damages caused by overload, improper use or by using the
product for competitions are not covered by the warranty.
Please return the defective product only with a valid proof of purchase and a detailed malfunction description.
SPECIFICATIONS
ZXi1501 ZXi2201
1 1
CLASS IGBT CLASS IGBT
Analog Analog
1 x 300 1 x 400
1 x 500 1 x 700
1 x 750 1 x 1100
1 x 600 1 x 800
1 x 1000 1 x 1400
1 x 1500 1 x 2200
> 200 > 200
> 90 dB > 90 dB
< 0,03% < 0,03%
9 - 0.2 V 9 - 0.2 V
> 47 kOhm > 47 kOhm
LP - Full - Slave LP - Full - Slave
35 - 250 Hz 35 - 250 Hz
0 - 18 dB 0 - 18 dB
WIDE - NARROW WIDE - NARROW
15 - 55 Hz 15 - 55 Hz
0 - 180° 0 - 180°
• •
• •
• •
2 x 50 A 2 x 70 A
260 x 60 mm 260 x 60 mm
380 (410) mm 430 (460) mm
25