Sabrent DS-UTC2 Benutzerhandbuch Seite 2

EN
DS-UTC2
User Manual
Docking Station Mode Setup Instructions
Step 1: Connect the power adapter to the back of the docking station.
Step 2: Plug the AC power cord into a power outlet.
Step 3: Connect the USB cable to the back of the docking station.
Step 4: Connect the other end of the USB cable to your computer's USB
port.
Note: Use the Type-C cable if your computer has a Type-C port. Use the
Type-C to Type-A cable if your computer has a Type-A USB port.
Step 5: Insert your hard drive into HDD1 if using a single drive.
Step 6: If using a second drive, insert it into HDD2.
Step 7: Turn on the docking station by pressing the power switch. The
red LED on the power indicator will illuminate.