Remote Control; Changing The Remote Control Battery; About The Remote Control - Legamaster PTX-9800UHD Benutzerhandbuch

INSTALLATION

4.7. REMOTE CONTROL

2
4
6
7
9
11

4.7.1. Changing the Remote Control Battery

1. Remove the battery
cover
Slide back and remove
the battery cover in the
direction of the arrow.
2. Insert the batteries
Align and insert two AAA
batteries according to their
plus and minus ports (as
indicated in the remote
control).
3. Close the battery cover
Replace the battery cover in
the direction of the arrow
and snap it back into place.
12
PTX-9800UHD – QUICK SETUP GUIDE – ENGLISH
LM-QSG_eScreen_PTX9800UHD-1606.indd 12
No Function Description

1 Turns the monitor on and off
2 INFO Provides source and resolution information
3 VGA Selects the PC RGB source
DVI Not available
1
HDMI 1 Selects the HDMI source 1
3
4 COMP Not available
AV (Video) Not available
HDMI 2 Selects the HDMI source 2
5
5 PIP position Selects the HDMI source
DisplayPort Select the DisplayPort source
6 PIP opens the PIP settings menu
8 S-V Hot Key for OPS source selection
HD-SDI 2 not available
7 SWAP no function
8 P-SOURCE Selects the PIP source
10
9 MENU Opens the monitor's on-screen menu system. If the
menu system is already open, pressing this button
will select the previous submenu
, , ,  Navigates through submenus and settings
12
10 EXIT Closes the menu system
11 ENTER Selects highlighted menu choices
12 SCALING Toggles between different aspect ratios (Auto,
Native, 4x3, 16x9, 16x10 and Letterbox)
FREEZE Freezes the current source image
MUTE Turns off the sound
BRIGHT Adjusts the brightness
CONTRAST Adjusts the contrast
AUTO Synchronizes the monitor with the source
SOURCE Allows selection of the different sources
VOLUME- Decreases the sound volume
VOLUME+ Increases the sound volume
I. Used batteries needed to follow the city rule to be
discarded.
II. Avoid keeping used, old batteries inside the remote
control, causing leakage of internal liquid resulting
metal rust or fatal damage to the remote control
hand unit.
III. Battery to be used according to the instruction
CAUTION

About the remote control

• Don't drop, shake or bump.
• Don't place on wet materials.
• Don't dismantle.
• Don't place in locations with exposure to
high-temperature or high-humidity levels.
 Hot Key:
OSD Menu Lock/
Unlock Control
Lock: Press Enter, Enter,
Exit, Exit, Enter and Exit
on the controller in
sequence to lock OSD
Unlock: Press Enter, Enter,
Exit, Exit, Enter and Exit
on the controller in
sequence to unlock OSD
06.07.16 13:10