Remote Control; Changing The Remote Control Battery; About The Remote Control - Legamaster XTX-7500UHD Benutzerhandbuch

INSTALLATION

4.7. REMOTE CONTROL

4.7.1. Changing the Remote Control Battery

1. Remove the battery
cover
Slide back and remove
the battery cover in the
direction of the arrow.
2. Insert the batteries
Align and insert two AAA
batteries according to their
plus and minus ports (as
indicated in the remote
control).
3. Close the battery cover
Replace the battery cover in
the direction of the arrow
and snap it back into place.
12
XTX-7500 – USER MANUAL – ENGLISH
Label Description
1 INFO Provides source and resolution information

2 Turns the display on and off
3 VGA Selects the PC RGB source
4 DISPLAYPORT Selects the DisplayPort source
5, 8, 11 HDMI 1, 2, 3 Selects the HDMI source
10 OPS Selects the OPS computer source
19 MENU Opens the display's on-screen menu system.
When the menu system is already open,
17, 18,
pressing this button will select the previous
▲◄►▼
20, 21 submenu
Navigates through submenus and settings
22 ENTER Selects highlighted menu choices
23 EXIT Closes the menu system
Selects each aspect ratio, in sequence: Full
26 SCALING
Screen, Native, Letter Box and Pillar Box
27 FREEZE Freezes the current picture on the screen
28 MUTE Turns off the sound
29 BRIGHTNESS Adjusts the brightness
30 CONTRAST Adjusts the contrast
31 AUTO Auto adjustment of VGA source
32 SOURCE Selects each source, in sequence
33 VOLUME - Decreases the sound volume
34 VOLUME + Increases the sound volume
I. Used batteries needed to follow the city rule to be
discarded.
II. Avoid keeping used, old batteries inside the remote
control, causing leakage of internal liquid resulting
metal rust or fatal damage to the remote control
hand unit.
III. Battery to be used according to the instruction
CAUTION

About the remote control

• Don't drop, shake or bump.
• Don't place on wet materials.
• Don't dismantle.
• Don't place in locations with exposure to
high-temperature or high-humidity levels.