Emergency Ejection - Sun Microsystems Sparcstorage Benutzerhandbuch

Figure 1-1
3. Push the eject button to close the tray.
You can also close the tray by lightly pressing on the front of the tray.

Emergency Ejection

Caution – Use this procedure only if you have tried to unmount the CD and the
!
eject button does not function. Data may be corrupted if this procedure is
performed while the LED indicator is lit.
1. Turn off power to the CD-ROM drive.
2. Use a large straightened wire paper clip (or similar object) and insert it
into the emergency eject hole until the tray opens.
The emergency eject hole is about the size of a paper clip and is located on
the front of the drive near the eject button.
Drive Information
Label
side
Inserting a CD into the CD-ROM Drive
1
3