Seite 2
Prior to assembly it is important to decide on the location of the umbrella and to respect the following instructions: - Choose a location that is level and sturdy. - Avoid any sloping of soft ground. - Consider a location that will maximize the umbrella’s 360° rotating function (if available) - Two-person team is recommended for assembly UMBROSA /...
Seite 3
BEFORE YOU START UMBROSA DEALER UMBROSA /...
Seite 4
All mounting kits and supports for inground tting and installation on hard surfaces should only be installed by a licensed contractor duly quali ed to perform the installation. Umbrosa assumes no liabilities and expressly disclaims any responsibilities for injuries or damages arising from or related to the failure of buyer to have any kit or tting installed by a licensed professional contractor.
Seite 5
BASE AND MOUNTING OPTIONS CONCRETE ANCHOR INSTALLATION UMFIXCROTG000000 > 60 cm* 1’ 11.6” > 60 cm* 1’ 11.6” > 40 cm* 1’ 3.7” INFINA NOT INCLUDED: HITUBG0000 MAFIXCROTG000000 MAPLAI0320 BARS FOR HIG (E.G. INGENUA SPECTRA INSTALLATION Dimensions are indicative. Final responsibility always lies with the installer.
Seite 6
FLAT BASE INSTALLATION OPTIONS FIBASE0002021000 FIBASEEXTRA00000 UMBROSA /...
Seite 7
FLAT BASE INSTALLATION FRAGILE SURFACE FRAGILE EDGES USE PACKAGING TO PROTECT FRAGILE EDGES UMBROSA /...
Seite 12
WHEEL PLATE THICKNESS UMFRATB_V1_HDG MACOMU005D UMFIXG0020_V1 MINIMUM MAXIMUM 38 x 38 cm 40 x 40 cm 15”x 15“ 16” x 16” THICKNESS 38 mm 45 mm TILE SPACERS 1x TOOL MABOLI0200 MACOMU064_B MACOMU65 S4 + S6 ” ” UMBROSA /...
Seite 13
TILE BASE INSTALLATION MEDIUM BASE: START WITH 1 LAYER PUNCH GALVANISATION LAYER IN HOLES IF NECESSARY UMBROSA /...
Seite 14
TILE BASE INSTALLATION OR 2x MEDIUM LARGE 1 TILE UMBROSA /...
Seite 15
TILE BASE INSTALLATION ADD SPACERS FOR PERFECT USE THE TOOL TO DEFINE COVER ALIGNMENT: THE AMOUNT OF SPACERS UMBROSA /...
Seite 16
TILE BASE INSTALLATION MEDIUM BASE: 1 LAYER LARGE BASE: 2 LAYERS REMOVE TILE UMBROSA /...
Seite 17
TILE BASE INSTALLATION PLACE SPACERS UMBROSA /...
Seite 18
TILE BASE INSTALLATION SEE UMBRELLA BOX FRAGILE SURFACE KEEP PROTECTION FILM DURING INSTALLATION UMBROSA /...
Seite 19
Les dimensions indiquées sont seulement à titre informatif. La responsabilité nale incombe à l’installateur. Die Maße sind nur informativ. Der Installateur trägt die Verantwortung für die Ausführung. Los tamaños son sólamente informativos. El instalador es responsable del acabado nal. Dimensioni sono indicative. La responsabilità nale spetta sempre all’installatore. UMBROSA /...
Seite 20
CONCRETE ANCHOR INSTALLATION UMBROSA /...
Seite 21
CONCRETE ANCHOR INSTALLATION GRASS GRAVEL TILES 10 cm / 4” 4 cm / 1 ” UMBROSA /...
Seite 22
CONCRETE ANCHOR INSTALLATION COVER UMBROSA /...
Seite 23
FIXED FLOOR INSTALLATION INF-ROUNDSUPPORT Not included - Niet inbegrepen - Pas inclus Nicht inbegri en - No incluido - Non incluso CONCRETE WOOD METAL DIN 7997-Z A2 8x100 DIN 7991 M10 DIN 7991 M10 UMBROSA /...
Seite 28
TIPS > 30 KM/H > 5 BEAUFORT min 30° UMBROSA /...
Seite 29
MAINTENANCE Maintenance instructions on website Onderhoudsinstructies op webpagina 40° Nettoyage et guide d’entretien sur le site web Pfl egehinweise auf der Webseite Instrucciones de mantenimiento en el sitio web Istruzioni di mantenimento sul sito UMBROSA /...
Seite 30
“stainless steel polishers”. Edelstahl bleibt nur frei von Korrosion, wenn dieser gut und Präventiv behandelt wird. Umbrosa emp ehlt regelmäßig die Ober äche zu reinigen und zu schützen.
Seite 31
Conditions de garantie sur le site Web Garantiebedingungen auf der Webseite Garantiebedingungen auf der Webseite Condiciones de garantía en el sitio web Condiciones de garantía en el sitio web Condizioni di garanzia sul sito Condizioni di garanzia sulla pagina web UMBROSA /...
Seite 33
SPARE PARTS FLAT BASE HFBASTP735_V01_U HUMWOODTOPFIBASE HFBASE0735_V01_U PLFIXS001_U FIBASEEXTRA UM-BASEWHEELS-TYPE1 (4x) MABASMOB03 (4x) MACOMU005D (4x) MABOLI0200 (16x) UMBROSA /...
Seite 34
SPARE PARTS MEDIUM TILE BASE MABOLI0980 ALU-COVERN-M-TBASE (4x) BLACK-COVERN-M-TBASE MACOMU063* (4x) MASCR00077 (8x) UMFRATBCR35_V1_HDG (2x) UMFIXG0020_V1 MACOMU064_B MABOLI0560 MACOMU65 (4x) 1x TOOL (4x) MACOMU005D (4x) UMFRATB_V1_HDG MABOLI0200 * COLOR CODES (16x) GREY _R7047 UMFIXG0021_V1 BLACK _R9005 (4x)
Seite 35
This technical sheet remains subject to possible changes. Of course we do our best to eliminate all mistakes, but Umbrosa is not responsible for the errors in the documentation of products.