Unfolding
1.
Open the cover. Unfasten the Velcro and separate the mattress from the frame.
2.
Spread the four legs of the crib evenly.
3.
Pull the sides of the crib to unfold it.
4.
Pull up the crib frame in the center section until it locks into place.
5.
Push down on the mattress support part until it locks into place.
6.
Lay the mattress in the crib, soft side up.
7.
Put the mattress Velcro (A) through the holes in the crib (B). Fasten the Velcro fasteners.
8.
The assembly is now complete.
Folding
1.
Unfasten the velcro of the mattress and then remove it from the crib.
2.
Pull the handle in the center of the crib to release the lock. Then lift the base about 25 cm upwards.
3.
Press the buttons in the center of the frames to release the locks, then fold the frames down.
4.
Fold the crib inward.
5.
Place the mattress on the floor with the soft side up. Place the folded crib on top of it. Then wrap it
with the mattress.
6.
Put the crib into the cover and zip it up. Folding is complete.
Cleaning and maintenance
For fabric cleaning instructions, see the mattress label. Clean the crib components by hand with
mild detergent and warm water. Never use abrasive/corrosive cleaners, ammonia-based, bleach or
alcohol. Make sure the product is completely dry before use or storage.
Optional accessories:
•
Wipe the changing table with a damp cloth and mild detergent. Do not iron or dry-clean. Do
not immerse in water.
•
Toys - hand wash to max. 40
06
C, do not bleach, do not tumble dry, do not iron, do not dry clean.
o