You can use the scales for weighing
briefly. The timer still counts backwards and a clock sign blinks on the
display.
Cleaning and Troubleshooting
Cleaning the device
Use only a mild soap solution or commercial glass cleaner to clean the
appliance. Avoid the use of chemical solutions and cleaning products
because these may damage the device's surface or markings.
Troubleshooting
Check if the scales are standing on an even surface.
Check that the batteries are correctly inserted.
If Lo appears on the display, then insert four new batteries.
If "O-Ld" appears on the display, then the scales are being
overloaded. Remove the weight from the scales immediately
otherwise lasting damage may occur.
by pressing the
EN-11
TARA
button
ES
EN
DE