Usage
Inserting batteries
The scales are supplied with two CR2032 batteries (Li coin cells).
If the screen shows "Lo" or the display's intensity falls the batteries must be
replaced.
Open the batterie compartment cover on the underside of the device.
Check battery polarity before inserting.
Place the battery between the guides and push against.
• Only insert new batteries and always exchange the complete set of
batteries.
• Do not expose a device containing batteries to direct heat or sunlight.
For example, do not store it on a radiator.
Ensure you use the batteries properly and adhere to the safety advice on
page 6!
Replace batteries
Open the batterie compartment cover on the underside of the device.
Push the battery through the guides to the open side.
Insert a new set of batteries as per description above.
EN-8