Restore Factory Settings - Absima Criop Schnellstartanleitung

Power settings
(Transmitter Setting item 4)
You can set after how many minutes without use the
transmitter alarm
transmitter should shut down automatically. The
transmitter supports the use of AA battery and 2-3S
LiPo batteries. Pleaseselect the appropriate battery
type and at what percentage you want the
transmitter to sound an audible warning. When the
set percentage is reached, replace/chargethe battery
as soon as possible. f the measured battery voltage is
not displayed with the actual voltage in the
transmitter, you can manually enter the correct
voltage in the voltage calibration input field.
Calibration Setting
(Transmitter Setting Item 5)
If the remote control is used for a long period of time,
the value of the channel may be shifted. The
calibration menu
Select the appropriate start button and follow the
instructions on the screen.

Restore factory settings

(Transmitter Setting point 5)
You can reset the remote control to the factory settings.
should be activated
can be used to re-read
and the
the values.
to Ott
I alarm
Calibrato
Atx»ut Us:
Hardware. VI .0.0
Software VI .0.9