Epomaker RT65 Schnellstartanleitung Seite 3

PAIRING BLUETOOTH
Turn the switch on the keyboard to ON.
1. Hold Fn+Q/W/E for 3-5 seconds till the indicator flashes fast, the keyboard is ready to pair.
2. Turn on your Bluetooth device and find the keyboard, then connect. When the keyboard is
connected to the Bluetooth device, the indicator stops flashing and the connection
3. Press Fn+Q/W/E to toggle between the Bluetooth devices 1/2/3.
PAIRING WIRELESS 2.4GHZ
Turn the switch on the keyboard to ON.
1. Hold Fn+R for for 3-5 seconds till the indicator light flashes fast, the keyboard is ready to pair.
2. Insert the 2.4G dong e to your device, when the indicator stops flashing, the connection is
done.
Note: The keyboard goes to sleep mode after 2 minutes of inactivity,
by any keypress.
WIRED MODE
Turn the keyboard switch to OFF and plug in the cable to enter wired mode.
JOYSTICK
Up: Previous track Left:
Down: Next track
Right: Volume +
Fn + Press joystick: Switch to the mouse mode:
move the joystick like using a mouse. Press the joystick
BATTERY CHECK
Hold Fn+B, the keys from 1to O lights up to show the battery percentage; for example, if the
keys from 1 to 6 light up when holding Fn + B, it means that the battery life is currently 60%;
if keys of I-Olight up, battery life is 100%.
is done.
and it can be reactivated
Volume - Press: Mute
left mouse click
SPECS
MODEL:
KEY AMOUNTS:
MOUNTING TYPE:
CASE MATERIAL:
PLATE MATERIAL:
STABILIZER TYPE:
PCB TYPE:
CONNECTIVITY:
ANTI-GHOST KEY:
LED DIRECTION:
POLLING RATE:
BATTERY CAPACITY:
COMPATIBILITY:
DIMENSION:
WEIGHT:
EPOMAKER RT65
67 Keys
Gasket
Plastic ABS
Plate-mounted
3/5-pin Hotswap PCB
Type C Wired, Bluetooth, 2.4G
NKRO
South-facing
1000hz under Wired and 2.4G Mode:
125hz under Bluetooth Mode
3000mAh
WINDOWS / MAC
332 x 130 x 45 mm
Around 0.8kg