Omega OUTVLCD203 Kurzanleitung
Quicklinks
5. Installing
the Display
wal
6. Adjustment
wall
Push or pull from the top or bottom of the display to obtain a desired angle.
Maintenance
• Check that the bracket
is secure
and safe to use at regular
• Please contact
your distributor
if you have any questions.
Hook the VESA plate(attached the display) onto the wall
plate and tighten the screw to secure it.
wal
intervals(at
least every three months)
LCD
Wall
75x75/100x100
OUTVLCD203
200x100/200x200
INSTALLATION
MANUAL
Mount
CAUTION:
DO NOT EXCEED
RATED
LISTED
WEIGHT.
SERIOUS
INJURY
OR
PROPERTY
DAMAGE
MAY
OCCUR!
42"
20kg
(441b')
RATED
Verwandte Anleitungen für Omega OUTVLCD203
Inhaltszusammenfassung für Omega OUTVLCD203
- Seite 1 INJURY PROPERTY DAMAGE OCCUR! Push or pull from the top or bottom of the display to obtain a desired angle. 42" 75x75/100x100 OUTVLCD203 20kg 200x100/200x200 (441b') Maintenance • Check that the bracket is secure and safe to use at regular...
-
Seite 2: Checklist
NOTE: Read the entire instruction manual before you start installation and assembly. Component Checklist IMPORTANT: Ensurethat you havereceivedall parts accordingto the componentchecklist prior to installation. f any parts are missing or faulty, telephone your local distributor for a replacement. A WARNING •... - Seite 3 1 .Separating the VESA Plate 2b. For Solid Brick and Concrete Mounting 55mm (2.2') ø 8mm (ø 5/16") se the screwdriver to loosen the screw In order separate the VESA plate from the wall mount. Mark exact location 2a. For Wood Stud Wall Mounting mounting holes...
- Seite 4 3. Installing the Wall Plate 4.1nstalling the VESA Plate Top of the displa (For clarity, the outer cover is not shown.) VI-B Align wall plate top hole to the screw and lower the wall plate until the screw is seated in upper area of tear-drop mounting hole.
- Seite 5 USER MAUAL TILT WALL MOUNT OUTVLCD203 PRZECZYTAJUWA2ENlE INSTRUKCJ<ZANIMPRZYSTAPISZDO NOTE: READ ENTIRE INSTRUCTION MANUAL BEFORE BITTE, LESEN SIE DIE HINWEISE BEVOR SIE ZU DEM INSTALATION START INSTALLATION ASSEMBLY. STALACJI. BEIZUTRETEN. Rozpocznij instalacjq tylko po uwa2nym zapoznaniu Siq z instrukcjq. Beginnen Sie die Installation nur nach sorgfältigem Lesen der aedienung- Do not begin the installation until you have read and understood all the W przypadku dodatkowych pytafi skonsu tuj Sie z dystrybutorem.