Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Electric Pole-Mounted Pruner IEAS 600
Content
1. General safety regulations
8. Technical data
13. Fault remedy
15. Warranty
16. Service
Packaging
This machine is packaged to prevent damage during transportation. The packaging is raw material and can thus be
reused or fed back into the raw materials cycle.
When using the machine certain safety precautions must be taken in order to prevent injuries and damage:
• Read through the operating instructions carefully and observe the instructions contained therein. Familiarise your-
self with the machine, its correct use and the safety devices by means of these operating instructions.
• Store these carefully so that the information is always available to you.
• In the event of the machine being handed over to another party, please include these operating instructions with it.
We accept no liability for accidents and damage caused as a result of disregarding these instructions.
1.
General safety information for power tools
Warning! Read all safety-related information and safety instructions! Failure to observe the safety informa-
tion and instructions may result in electric shock, burns and/or severe injury.
Keep the safety information and instructions for future reference.
The term 'power tool' as used in the safety information and instructions includes both mains-operated tools (with power
cord) and battery-operated tools (without power cord).
1) Safety at the workplace
a) Keep your working area clean, tidy and well-lit. Disorder and poorly lit working areas may result in accidents.
b) Do not operate the power tool in potentially explosive environments containing combustible fluids,
gases or dusts. Power tools generate sparks that may ignite dusts or fumes.
c) Keep children and other persons away while you are operating the power tool. Distractions may result in the
operator loosing control over the tool.
2) Electrical safety
a) The mains plug of the power tool must fit into the mains socket. The plug must not be modified in any
way. Do not use adapter plugs/connectors in combination with tools with protective earthing. Unmodified
plugs and fitting sockets reduce the risk of electric shock.
b) Avoid physical contact with earthed surfaces as pipes, heaters, ovens and refrigerators. There is an
increased risk of electric shock if your body is earthed.
c) Keep the tool out of the rain or moisture in general. The penetration of water into a power tool increases the
risk of electric shock.
GB | Operating Instructions
1
Translation of the original Operating Instructions
Werbung
Kapitel
Inhaltsverzeichnis
