Before Initial Use; Use - Maxxmee Rf-01 Bedienungsanleitung

EN
NOTICE – Risk of Damage to
Material and Property
■
Do not operate the device for a long
period of time without any contents to
prevent any damage to the non-stick
coating of the grill plate.
■
Switch off the device and pull the
mains plug out of the plug socket
if an error occurs during operation,
when there is a power cut or before a
thunderstorm.
■
When you pull the mains plug out of
the plug socket, always pull on the
mains plug and never the mains cable!
■
Never pull or carry the device by the
connecting cable.
■
Protect the device from: heat sources,
fire, sub-zero temperatures, persistent
moisture and impacts.
■
Use only original accessories from the
manufacturer in order to guarantee
that there is no interference that may
prevent the device from working and
to avoid possible damage.
■
Do not place heavy objects on the
device or the connection.

BEFORE INITIAL USE

1. Clean all the accessories of the device.
To do this, follow the instructions in
the "Cleaning and Storage" chapter.
2. Place the grill plate (1) on the device
and heat up for a few minutes to
remove any possible production res-
idues from the grill plate. To do this,
follow the instructions in the "Use"
chapter.
L
When the device is first used,
production-related additives may
cause a small amount of smoke
and / or an odour to be pro-
duced. This is normal and not a
device defect.
3. Clean the grill plate again.
14
00905_Inlay_DE-EN-FR-NL_A5_V3.indb 14 00905_Inlay_DE-EN-FR-NL_A5_V3.indb 14

USE

Please Note!
■
Check the device and the connection
for damage each time before putting
it into operation. Use the device only
if it is undamaged and in working
order.
■
Only connect the device to a plug
socket that is properly installed and
matches the technical data of the
device. The plug socket must also be
readily accessible after connection so
that the connection to the mains can
quickly be isolated.
■
Do not use the device with cable
extension reels or extension cables
which are longer than 3 m.
■
Do not connect the device along with
other consumers (with a high wattage)
to a multiple socket in order to pre-
vent overloading and a possible short
circuit (fire).
■
Make sure that the connection is not
squashed, bent or laid over sharp
edges and does not come into con-
tact with hot surfaces (including those
of the device!).
■
Ensure there is sufficient clear space
on all sides. Do not place the device
below kitchen wall units or similar
cupboards. The rising steam could
cause damage to them!
■
Additional kitchen utensils used to
turn and remove the food must be
heat-resistant and be made of wood
or plastic. Metal objects or other
sharp-edged objects could damage
the non-stick coating of the grill plate
or the small pans.
■
Ensure that there is sufficient ventila-
tion while the device is in operation.
03.07.2024 10:29:26 03.07.2024 10:29:26