Additional Connections; Connecting Usb Devices; Inserting A Memory Card; Startup - Hama Internet TV Box Original Bedienungsanleitung

g

Additional connections

Connecting USB devices

Switch on the device.

Fold down the cover of the USB ports ( ) on the front of the device.

Connect the devices with USB interface (keyboard, mouse, USB stick, external hard

disk, ...) to one of the USB connections (USB ports) ( ) or (

Inserting a memory card

Switch on the device.

Insert the memory card (e. g. SD, MMC, MS) with the label facing upwards into the

memory card slot (

Startup

Inserting batteries into the remote control

Open the cover of the battery compartment on the back of the remote control.

Place the two AAA batteries supplied into the battery compartment and pay atten-

tion to the correct polarity.
Replace the cover on the battery compartment.

NOTE
Change the batteries if the range of the remote control decreases or if the device
►
no longer reacts to all commands.

Switching the device ON and OFF

Switch on

After connecting to the power supply, the red power indicator lights up. The device
switches on automatically after a few seconds and the green operation indicator lights
up.
If the device is in standby mode, you can switch it on by pressing the
on the remote control. The operation indicator lights up green.
NOTE
Select the A/V input on your TV set.
►

Switching off

After pressing the
mode and the operation indicator extinguishes.
NOTE
To switch off the device completely, remove the AC adapter from the mains socket.
►
46
00054801man_en.indd 46
) on the right side of the device.
5
ON/OFF button on the front of the device, it switches to standby
Startup
) of the devices.
6
ON/OFF button
Internet TV Box
07.09.11 09:36