Manual Tuning; Automatic Tuning - Roadstar HIF-1999D+BT Bedienungsanleitung

SETTING THE DISPLAY TIME AND DATE
Operation
1. Switch ON the POWER ON/OFF BUTTON (15). The Display (18) will
light up.
2. Press the MENU BUTTON (19) then turn the TUNING/ENTER KNOB
(21) until select the "SYSTEM".
3. Turn the TUNING/ENTER KNOB (21) until select TIME, then press the
TUNING/ENTER KNOB (21) to confirm.
4. Turn the TUNING/ENTER KNOB (21) and select SET 12/24 HOURS.
Press the TUNING/ENTER KNOB (21) to confirm.
5. Repeat the above operation 2-4 and select one of the following op-
tions: SET TIME/DATE or AUTO UPDATE.
6. If selected SET TIME/DATE, use the TUNING/ENTER KNOB (21) to
set Hour & Minutes, then press the TUNING/ENTER KNOB (21) to
confirm the operation.
7. To set the Auto-Updating, follow the above procedure 2-6 and select
AUTO UPDATE. From this menu, move the TUNING/ENTER KNOB
(21) to select one of the following options: FROM ANY / FROM DAB /
FROM FM / NO UPDATE.
The operation is complete and the display show the DATE and TIME.
TUNER/ENTER
TUNER/ENTER
Turn left & right to move inside of
Display menu, then push the same
knob to confirm each function.
English
FROM ANY
SET TIME/DATE
FROM DAB
TIME AUTO UPDATE
FROM FM
SET 12/24 HOURS
NO UPDATE
LANGUAGE ENGLISH
DEUTSCH
NEDERLANDS
SW VERSION
NORK
SWENSKA
5 6
FM RADIO OPERATION
ANTENNA
For FM and DAB reception there is a built-in rod antenna (28) at the rear
of the unit. Extend the antenna and move around to obtain the best recep-
tion signal.
Operation
1. Switch ON the POWER ON/OFF BUTTON (15). The Display (18) will
light up.
2. Press sequentially the FUNCTION BUTTON (6) to select the FM Ra-
dio.

MANUAL TUNING

Tune to the desired radio station by turning the TUNING/ENTER KNOB
(21).

AUTOMATIC TUNING

1. During FM working mode, press the MENU BUTTON (19), then turn
the TUNING/ENTER KNOB (21) until select the "SCAN SETTING".
2. Move again TUNING/ENTER KNOB (21) and select the option betwe-
en ALL STATIONS and STRONG STATIONS ONLY. Press the
TUNING/ENTER KNOB (21) to confirm.
3. Press the SCAN BUTTON (32) and the unit will scan all of the FM sta-
tions.
RADIO DATA SYSTEM INFORMATIONS
During FM working mode, press the INFO BUTTON (31) to display the
following
BITRATE/TIME/DATE.
FM & FM-Stereo Reception
Stereo reception is possible when the tuned FM station is broadcasting

English
informations: PROGRAM TYPE/PROGRAM NO/AUDIO