Protection When Transporting The Material; Rodeostop B100 - Clic-It Protectman Rodeostop B100 Benutzerhandbuch

XVII. PROTECTION WHILE TRANSPORTING THE MATERIAL
It is very important to protect the RODEOSTOP B100 during transport to avoid
damage. All the parts of the fall arrest system (ropes, harness, connectors) should be
carefully placed in a suitable container and sheltered from knocks and rubbing into
each other. On return to the site the RODEOSTOP B100 should be stored away
carefully.
There is a real risk that the ropes, harness and fall arrest device scattered higgledy –
piggledy on the dusty, sandy floor of a vehicle will quickly become unusable if taken
to the site in such a way.
XVIII. THE SIGNIFICANCE OF SYMBOLS AND MARKINGS ON THE EQUIPMENT
The laser-engraved markings on the stainless-steel casing of the RODEOSTOP
B100 carry important information.
➢ a dial of twelve months
➢ a semicircle dial of years
➢ a book (read the instructions for use)
➢ a pictogram representing a maximum weight of 130 kg
➢ the European standard reference CE0082-EN360: 2002 A.R.A.
➢ the inscription: automatic full arrest device, the name and trade mark – Rodeostop
B100
➢ the lot number – for example lot 0101 serial number 0001
➢ a means of identification: manufacturer's name and address: PROTECTMAN tel.
(33) 0145345205 fax: (33) 0954178012 www.rodeostop.com
➢ an oblique dotted line showing ropes on each side under stainless steel casing
engraved 10/10.5mm semi-static CE EN 1891A
INFORMATION ON THE DIE-STAMPING:
Marking by die-stamping will be effected as and when appropriate. This will be the
die-stamping of the months and years directly onto the stainless-steel casing during
the dismantling necessitated by the obligatory annual check-up.
XIX. CONTACTING THE HEAD OFFICE OF THE MANUFACTURER OF

RODEOSTOP B100

Protectman
2 Rue Maisant
92190 MEUDON
FRANCE
Tel: 00 331 4534 5205
- 7 -