stabo multifon security IV Bedienungsanleitung Seite 33

11 Motion symbol
Triggering of recording through movement detection is activated (appears when pressing
the Motion key, disappears when pressing the key again).
12 Volume indication
Shows the adjusted volume level for 5 sec. (available levels: 9).
For level 0 the
13 Download symbol
New firmware is available.
No signal warning
If the transmission range is exceeded (or the camera
is switched off), image transmission is not possible, the
display shows OUT OF RANGE.
Reduce the distance between camera and
monitor (or switch the camera on).
Functions
Night vision function
Thanks to powerful infrared LEDs on the camera, image transmission is also possible with poor
lighting conditions, in this case, the monitor image is shown in black and white.
The night vision function is automatically activated/deactivated through the light sensor (on the
front side).
Camera change function
Manual camera change
For manually switching over between the available cameras, press the Cam key or the
keys of the joystick.
Automatic camera change
For automatically switching over (every 5 sec.) between the available cameras, press the Quad
key twice.
For deactivating this function press the Cam key.
Quad mode
The Quad function offers 2 view modes:
For activating press the Quad key.
Press the Cam key to return to full screen mode.
symbol for speaker muting is shown.
half quad mode
33
quad mode