stabo multifon security IV Bedienungsanleitung Seite 29

10 Record key
Manual start/stop of recording.
11 Power key
For switching the monitor on/off.
For switching on, press and hold the key for approx. 6 sec., the display shows the startup image
MyCam View for approx. 8 sec. before the camera's live image is displayed.
For switching off, hold the key pressed until Powering OFF is displayed.
12 Vol/Adj key
In view mode, volume control in 9 levels (bar display turns off after 10 sec.)
Monitor (side view)
13 SD memory card slot
Recording the video/audio signals of the camera(s) on a commercially
available SD memory card of max. 64 GB, the display shows the
SD memory card symbol
14 Talk key
Activation of the Intercom function (voice communication between
camera and monitor, only possible in full screen mode).
Hold the Talk key pressed on the monitor (the display shows the
speech symbol) and speak with normal voice level. Release the
Talk key afterwards (the speech symbol turns off), such that the
person can answer into the camera.
Monitor (back side)
15 Internet connection (RJ45)
LAN cable port
16 5 V DC IN socket
Power supply connector (OUTPUT 5 V DC/2 A)
17 Antenna
(for an optimum reception, the antenna must be as vertical as possible)
18 QR code
QR code scan or manual input of UID number.
19 Speaker
20 Stand
29