Fit Settings - Hbm Fit-Aed-Kit Betriebsanleitung

10
6

FIT settings

Parameters are stored in the FIT in a power failsafe manner.
FIT settings (default):
CAN bus address 63 / DeviceNet address 63
D
CAN baud rate 125000
D
Diagnosis address (ADR=31, baud rate 38400)
D
FIT settings can be changed using the AED_Panel32 (Version 3.x.x) Panel
software.
7 Startup
Connect the transducer to the AED9401A
D
Connect AED / FIT to the Starter KIT
D
Start Panel software
D
Select CAN / DeviceNet / Diagnosis communication mode
D
Set appropriate baud rate
D
Run BusScan; if connection is OK, address 63 (default)
D
is displayed in the bus survey on a light background
Select other dialog menus of the Panel software
D
HBM
FIT-AED-KIT
A2022-1.0 de/en