General Specifications; Accessories Available - Textron Ransomes 933407 Sicherheits- Und Bedienungsanleitung

EC Gear
Drive
Midsize
POWER UNITS
ENGINE FRAME:
7 GAUGE STEEL.
TRANSMISSION:
5 SPEED MODEL 700 PEERLESS GEARBOX WITH
REVERSE. BALL BEARINGS ON OUTPUT SHAFT.
1st gear 1.6 mph (2.6 km/h)
2nd gear 2.2 mph (3.5 km/h)
3rd gear2.8 mph (4.5 km/h)
4th gear3.4 mph (5.5 km/h)
5th gear4.3 mph (6.9 km/h)
Reverse 2.5 mph (4.0 km/h)
TRACTION WHEEL CONTROLS:
FINGER TIP LEVERS AT HANDLES CONTROL
INDEPENDENT POWER TO EACH WHEEL FOR
MOVING, STOPPING AND POWER TURNING.
BRAKES:
BAND TYPE, HEAVY DUTY LINING, INDEPEN-
DENTLY CONTROLLED BY TRACTION LEVERS.
PARKING BRAKES AT TRACTION LEVER LOCKS.
HANDLES:
HEAVY GAUGE TUBULAR STEEL. RESILIENT
GRIPS, ADJUSTABLE HEIGHT.
TURNING RADIUS:
INSIDE WHEEL 0".
CONTROLS:
THROTTLE. SPEED SELECTOR LEVER. FINGER
TIP WHEEL DRIVE LEVERS. BLADE DRIVE EN-
GAGEMENT SWITCH, PARKING BRAKES AT
TRACTION LEVER LOCKS. OPERATOR PRESENT
CONTROLS.
AXLE:
1.0"(25.4mm) DIAMETER STEEL SHAFT, REPLACE-
ABLE.
DRIVE BELTS:
• HA-DOUBLE BANDED. WITH ARAMID FIBER.
DRIVE TIRES:
• 16 X 6.50 TURF TREAD

GENERAL SPECIFICATIONS

CUTTERDECKS
CONSTRUCTION:
7 GAUGE STEEL DECK WELDED SINGLE UNIT,
BAFFLED FOR HIGH VELOCITY AIR FLOW, LARGE
DISCHARGE OPENING WITH CHUTE GUARD
DEFLECTOR.
SPINDLES:
1" SPINDLE SHAFT ON MAINTENANCE FREE
SEALED BALL BEARINGS IN PRECISION
MACHINED HOUSING.
CASTERS:
9 X 3.50-4 SOLID FOAM
HEIGHT OF CUT:.
ADJUSTABLE FROM 1-3/8" to 4-5/8" (3.5-11.7 cm)
BLADE DRIVE:
INDUSTRIAL B SECTION HEAVY DUTY V-BELT
DRIVE (NOT TWISTED) FROM CRANKSHAFT TO
CUTTERDECK WITH 5" STEEL IDLERS ON SEALED
BALL BEARINGS. PTO SWITCH ON CONTROL
PANEL CONTROLS ENGAGEMENT OF BLADES..
BLADE MATERIAL:
1566 ALLOY STEEL, AUSTEMPERED AND HEAT
TREATED.

ACCESSORIES AVAILABLE

STANDUP SULKY
METAL EASY DUMP GRASSCATCHER
ECO-PLATE
GB-15