Textron Ransomes 933407 Sicherheits- Und Bedienungsanleitung Seite 15

EC Gear
HEIGHT OF CUT
Drive
Midsize
FIXED CUTTERDECK HEIGHT OF CUT
NOTE: Use only these combinations of settings. If any other setting is used, quality of cut will suffer because of
wrong blade angle. Height of cuts shown on these charts were done in a controlled workshop environment.
Slight variations can occur in the field, depending on tire pressures, etc. Make sure front of blade is lower than
back of blade to prevent double cutting. Adjustment is provided by removing 1/8" washer beneath caster
support.
GB-13