Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Switch the dimmer display
The dimmer display can be switched from percent to the DMX-value:
Press and hold the Record-button.
Press the Insert-button and the display switched to the DMX-value (0-255).
In order to switch the display back to percent, repeat the procedure.
Memorize scenes
With the Scene Setter you can memorize up to 96 different scenes with 48 channels (Page 1 to Page 4).
Press the Mode Select-button, until the 1-48 Single/Preset Park-LED is lit.
Push the Master A-fader to maximum.
Push channel-faders to the desired setting.
Press the Record-button.
Press and hold the Record-button and press the desired Flash-button in Preset B.
The scene is now memorized on this fader.
Call up scenes
Press the Mode Select-button, until the Chase/Scenes-LED is lit.
Pull all channel-faders to minimum.
Push the Master A-fader to maximum.
Push the channel-fader of the desired scene in Preset B to maximum.
The scene will be called up.
Memorize chasers
With the Scene Setter you can memorize up to 48 different scenes with 24 channels (Page 1 to Page 4).
Press the Mode Select-button, until the 1-48 Single/Preset Park-LED is lit.
Push the Master A-fader to maximum.
Push channel-faders to the desired setting.
Press the Record-button.
Push channel-faders to the desired setting for editing the next scene and press the Record-button.
Memorize as many scenes as desired or until the maximum (999 scenes) is reached.
Press and hold the Record-button and press the desired Flash-button in Preset B.
The scene is now memorized on this fader.
Call up chasers
Press the Mode Select-button, until the Chase/Scenes-LED is lit.
Pull all channel-faders to minimum.
Push the Master A-fader to maximum.
Push the channel-fader of the desired chaser in Preset B to maximum.
The chaser will be called up.
Run a chaser
Adjust the desired fade-time via the Fade-Fader.
Adjust the desired chaser-speed via the Speed-fader.
If the chaser is to be run sound-controlled, press the Audio-button and adjust the desired sensitivity via the
Audio-fader.
If the chaser is to be run exactly in the bass-beat, pull Speed-fader to minimum (the display shows "Sho")
and enter the bass-beats by pressing the Tap Sync-button repeatedly.
If the chaser is to be run step by step, pull Speed-fader to minimum (the display shows "Sho") and press the
Step-button repeatedly.
Switch the speed-range
The speed-range can be switched from 5 minutes to 10 minutes:
20/23
70064545X87NXS_V_1_0.DOC
Werbung
Inhaltsverzeichnis
