______________________________________________________________________________________________
Switching the LEDs On and Off
The LEDs can be switched on and off with the button
control unit remains switched on. After switching on, the LEDs light up
according to the last control program selected.
Constant Lighting in One Color
For constant lighting of all LEDs in one color, press the corresponding color
button. Use the buttons
available.
Adjusting Custom Colors
To store custom colors, 6 storage locations are available.
1
To start the setting procedure, shortly press one of the buttons
6
to
.
2
Now adjust a color with the six arrow buttons above. If you press any
other button, the setting procedure is aborted.
3
Shortly press the
procedure. The color adjusted can now directly be called with a short
actuation of the button.
4
To overwrite a color, follow step 1 to 3 again.
______________________________________________________________________________________________
www.eurolite.de
and
to adjust the brightness. 9 levels are
DIY
button once again, to complete the setting
20
. However, the
DIY 1