Camera Connection - Caliber Rmd901Dab-Cp Handbuch

Camera Connection

The radio has two camera inputs: one for a rearview camera (REAR) and one for a front camera (FRONT). Both
are optional and can be connected individually or together.
Rearview Camera (REAR)
•
Triggering the camera: Connect the pink sensor wire from the 16-pin connector (position 3) to the
reverse light. When this wire receives power, the radio will automatically switch to the rear camera
input.
•
Power supply for the camera: Connect the pink power wire from the 12-pin connector (position 6) to
the camera's power input. This wire will activate when the sensor wire is triggered or when the
rearview camera is manually activated via the control screen.
îïCALIBER
English