3M Multimedia Projector X65 Sicherheitsanleitung Seite 12

3. Remove lamp module: Carefully slide the lamp module out (4) using steady pressure.
4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated.
Tighten the lamp module retaining screws (3) to secure the lamp module in place.
Optional Lamp: 78-6969-9547-7 (Contact 3M customer Service.)
Insert the hinge tabs on the bottom of the lamp access door, then close and tighten the retaining
screw (1) to secure the door.
Reset the lamp operation hours. See "Reset Lamp Hours" for details.
(1)
(2)
12
√ Note
(3)
3M™ Multimedia Projector X65 Product Safety Guide
(4)
© 3M 2003