Connection Diagram - Irradio Hom-Mod-Switch Benutzerhandbuch

ADD THE DEVICE
1. Connect your smartphone to your WiFi Router
2. Touch the "+" or "Add device" button. The Select Device Type page appears.
3. Turn on and off with the switch 5 times until a alternate beep is heard.
4. Select "Electric" - "1 Channel Switch".
5. Follow the instructions on the Hom-io App.
SCENARIOS AND AUTOMATION
Create custom scenarios for your devices
or lights, click "Smart" then "Add Scenario"
or "Add Automation" and select the
activation conditions.

CONNECTION DIAGRAM

1. Disconnect the general power supply before starting work
2. Connect the wires according to the following diagrams
3. Insert the module in the box or in the chosen place
4. Connect the general power supply and follow the association instructions with the App.
MECHANICAL MEMORY AND MANUAL CONTROL
The device maintains manual control with switch or button
(Monostable).
- The App command replaces the switch command and vice versa,
remaining in memory.
- App control is synchronized with the switch.