Product Introduction; Product Information - Xtool F2 Benutzerhandbuch

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please visit our customer support page: www.alza.cz/EN/kontakt.
Unboxing and Installation
Follow the unboxing guide to set up your xTool F2 step by step and ensure all
components are properly installed before use.
Download and install the latest software
Get the latest version of xTool software (xTool Studio) from our official website.
https://www.xtool.com/pages/software/#1
Make Projects
Explore the recommended material settings (inside the software) to start your first
project. These presets help you quickly find the ideal engraving and cutting parameters
for different materials.

Product Introduction

Product Information

xTool F2 is a dual-laser engraver that combines a 15W diode laser with a 5W infrared
laser. It is an upgraded iteration of the xTool F1, which features a 10W diode laser and a
2W infrared laser. In addition to the upgraded laser power, the xTool F2 also boots
engraving speed from 4000mm/s to 6000mm/s introduces a built-in 50MP camera for
precise positioning and real-time preview.
Item
Product Name + Positioning
Product Overview
Certifications
Compatible Accessories
Description
xTool F2
The best portable laser for starting a
business.
F2 is dual-laser engraver featuring a 15W
diode laser (455 nm) and a 5W infrared
laser (1064 nm)
CE (EU), FCC/FDA (U.S.)
xTool RA3
•
xTool RA2 Pro
•
xTool F1 Pedal or button switch
•
xTool F1 Slide extension
•
Desktop Air Purifier
•
Desktop Air Purifier Fiter
•
3