Herunterladen Diese Seite drucken
V620 - Salo Type A
loading

Inhaltszusammenfassung für Verano V620

  • Seite 1 V620 - Salo Type A...
  • Seite 2 WARNING WARNING WARNING WARNING Plaatje niet verwijderen Plaatje niet verwijderen vóór montage! vóór montage! Gasveren staan onder spanning! Gasveren staan onder spanning! Don’t remove stop plate Don’t remove stop plate before installation! before installation! Gas struts are under tension! Gas struts are under tension! V 620 - 250512...
  • Seite 3 PARTNER Zuurvrij Fout Goed Acid-free Wrong Right Säurefrei Falsch Recht Sans acide Pas bien Bien V 620 - 250512...
  • Seite 4 Algemene waarschuwing Als u het Verano® product zelf monteert, is dat voor uw eigen risico. Gebruik deze instructie slechts als een hulpmiddel en alleen bij montage van dit specifieke Verano® product. Mocht u er zelf niet uitkomen, dan kunt u altijd kiezen voor professionele montage. Het montageteam van uw Verano®...
  • Seite 5 V 620 - 250512...
  • Seite 6 L1=L2 V 620 - 250512...
  • Seite 7 L= B -8mm L1=L2 V 620 - 250512...
  • Seite 8 V 620 - 250512...
  • Seite 9 V 620 - 250512...
  • Seite 10 V 620 - 250512...
  • Seite 11 Tip: Vet/ grease V 620 - 250512...
  • Seite 12 V 620 - 250512...
  • Seite 13 V 620 - 250512...
  • Seite 14 V 620 - 250512...
  • Seite 15 V 620 - 250512...
  • Seite 16 Adjusting Sunea io motor Afstellen Sunea io motor Adjustment with a local control (1W transmitter) Afstelling met een lokale bediening (1W zender (Cassette awning) Automatic setting of the upper end position (Cassette zonwering) Automatische afstelling van het bovenste eindpunt and manual setting of the lower end position. en manuele afstelling van het onderste eindpunt.
  • Seite 17 V 620 - 250512...
  • Seite 18 V 620 - 250512...
  • Seite 19 Adjusting Sunea io motor Afstellen Sunea io motor 4 Adjust the lower end position, 4 Afstellen van de onderste eindpositie, send product downward stuur product omlaag Press >2 s → product >2 s indrukken, product STOP op Press <2 s, product moves <2 s indrukken, product gaat STOP at lower moves down...
  • Seite 20 V 620 - 250512...

Diese Anleitung auch für:

Salo type a