Marmitek Connect AE24 UHD 2.0 Gebrauchsanweisung Seite 10

1. Use an HDMI cable to connect the HDMI source (digital TV
decoder, Chromecast, media player) to the "Input" (1).
2. Use an HDMI cable to connect the TV (monitor or projector)
to "Output 1" (2). If you want to use the ARC function (refer to
page 11), your TV needs to support this. Please refer to your
TV's user manual to check which HDMI port supports ARC.
3. Use the appropriate cable to connect your audio device
(home cinema set, AV receiver or soundbar) to the output (3)
marked "Audio only", "Digital audio" or "Analogue audio".
x
Audio only: use an HDMI cable. This output only
reproduces audio and supports Dolby Atmos, DTS:X
and all other common audio formats.
x
Digital audio: use an optical (Toslink) or coaxial cable.
This audio output supports the DTS 5.1, Dolby
Digital/AC3 and PCM 2.0CH stereo formats.
x
Analogue audio: use a stereo jack cable; this output
supports the analogue stereo audio format.
4. Connect the power adapter to the "DC 5V" input (4) and
insert the plug into the socket.
10 © MARMITEK