Fiap profinet FishTrap 2-fold Gebrauchsanweisung Seite 4

FISH TRAPS & BASKETS
profinet FishTrap
Enema Throat
Type 1
ASSEMBLY INSTRUCTIONS
All parts are connected to each other by hooking and twisting to the right, while a safety
resistance must be overcome. A tip: spray the hooks and connection points with silicone.
This makes overcoming the fuse resistance much easier. This assembly can be carried
out by one person with some skill. However, it is easier if a second person holds a part
while the other person connects the next part by pressing downwards and turning
to the right. The hooks only serve as an assembly aid. The stability of the eel basket is
achieved by firmly connecting all parts with cable ties.
1
7
STEP 1
Bend the two bodies Type 1 and Type 2 into a conical cylinder and insert the buttons
4
through the holes. Secure the connection by moving the buttons in the slots.
Body
Type 1 Type 1
2 3
8 9
Throat Between-
Type 2 ring Type 2
Throat
mission
4
10 11
2-fold
Body End
piece
Iron-
pole
4 5
12 13
Bait- Cap
basket
6
14