Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
The device does not reach the working pressure
GB
Bleed the machine: Allow the pump to run without the high-pressure hose
until the water coming out of the high-pressure outlet no longer contains any
bubbles. Then reconnect the high-pressure hose.
Clean the fi lter in the water connection (3).
Check the water supply amount.
Check the supply pipes to the pump to see if they are leaking or blocked.
Major fl uctuations in pressure
Clean the high-pressure nozzle: Remove any dirt from the apertures with a
needle.
Rinse out the dirt by allowing the water to pass through the nozzle in the oppo-
site direction to the jet.
Leaking pump
It is normal for the pump to leak slightly. Should the leak become larger please
contact our service department.
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
The device supplied by our Company is covered by a 24 month guarantee starting
on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its accessories *) ascri-
bable to material or manufacturing defects will be eliminated free of charge by
repairing or, at our discretion, by replacing it. The guarantee services do not entail
an extension of the life of the guarantee nor do they give rise to any right to a new

guarantee!

Proof of the guarantee is provided by the proof of purchase. Without proof of
purchase no free replacement or repair will be carried out.
If you wish to make a claim under the guarantee please return the entire machine
in the original packaging to your dealer together with the receipt.
*) Damage to accessories does not mean automatic free replacement of the whole
machine. In such cases please contact our hotline. Broken glass or breakage of
plastic parts are always subject to a charge.
Defects to consumables or parts subject to wearing (e.g. motor pistons, kneading
blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc.)
66
6....-05-HDR 2941 66
Guarantee
07.01.2005, 14:32:18 Uhr

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis